Craftsman Easy Start Weed Fan Pawl Replacement
Part Number: 753-08159 Ships within 1 business day Product Information Description: This pawl kit is an OEM direct from Craftsman. Composed of metal and plastic items, the kit is made for use with lawn and garden trimming devices. The pawl kit is designed to rotate the flywheel, activating the device's engine when the operator pulls the rope starter. The kit is sold individually. E-clips and pawl springs are included. A screwdriver and a pair of pliers are required for the removal and repair. Compatibility This part is compatible with the following machines: Products Compatibility This item works with the following types of products: Questions & Answers Showing questions 1-10 of 15 Is this plastic pawl kit interchangeable with the original METAL pair of pawls on my 30cc craftsman trimmer model #316731930? Dominick for model number 316731930 asked on 2019-09-11 Hello Dominick and thank you for writing. Yes, they are interchangeable. Thanks again! Is this plastic pawl kit interchangeable with the original METAL pair of pawls on my 30cc craftsman trimmer? Dominick asked on 2019-09-11 Hello Dominick and thank you for writing. We would be happy to do some research to find you the correct parts. However, we need your model number and the brand name to locate any information on this. Model numbers can be short or long, and could have a mixture of numbers and letters. Hope the hear from you again! TB625-EC, serial# 41ADZ62C766 Will this pawl kit work for this trimmer. Thanks Anthony for model number TB625-EC asked on 2019-05-07 Hello Anthony, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: 753-08159. Hope this helps! Need trimmer head that bump feeds not the org James Taylor Sr. for model number 316 711193 sn#1k216db1513 asked on 2019-05-07 Hello James, thank you for your inquiry! For model 316711193, the head assembly is part number 753-06764. I hope this information helps! I am looking for a starter Paw kit for a weed wacker with the model # listed, the paw kit shown in the is the only one and it is made of plastic. The one on my weed eater is made of metal. Are you aware or this part? Reyes for model number 316.740970 asked on 2020-03-23 Hello Reyes, Thank you for your question. We apologize, but the part you're looking for is discontinued and no longer available from our website. We suggest getting in contact with the manufacturer to find a substitute replacement part that would be compatible to your model. We hope this helps. Will this part fit model 316.740930? thanks Mike for model number 316.740930 asked on 2020-02-25 Hello Mike, thank you for your inquiry. Pawl kit 753-08159 is not compatible with your model 316.740930. We apologize for the inconvenience. paw kit replacement vedio Thomas for model number 316731970 asked on 2020-01-31 Good Day Thomas. Thank you for your question regards to your unit (Model Number 316731970). The following URL should be what you are looking for: https://www.youtube.com/watch?v=kLe9COSEkC4. We hope this helps. Best Regards. Will this fit my trimmer Craftsman Model number 316731972? John for model number 316731972 asked on 2020-01-09 Hello John, Thank you for the question. The Pawls for this model are only sold as part of the Starter Housing, Part Number: 753-08350. We hope this helps! How to install paw kit for P/N 753-08159 Chuck for model number 316-740970 asked on 2019-11-16 Hello Chuck and thanks for writing. We have attached the link to our repair video. We hope this helps. Please contact us anytime. https://www.youtube.com/watch?v=kLe9COSEkC4 Do they make these Pawls in metal? I have to replace these about every 3 or 4 months of use. Seems metal ones would hold up much better. David asked on 2019-08-28 Hello David, Thanks for your question! Unfortunately, we were not able to find a metal version of this part. You could try calling Craftsman Parts at 800-366-7278. They may have a suggestion for a comparable part. If they give you a part number feel free to contact us for pricing and availability. We hope this helps! Showing questions 1-10 of 15 Repair Instructions: Submitted by Customers Like You 4 of 6 people found this instruction helpful Time Spent Repairing: 15-30 minutes Tools Used: Screwdriver, Needle Nose Pliers Could not start weedwacker when pulling rope. Ordered and installed new Pawl kit. Which consist of 2 plastic Pawls and 2 springs. Did you find this story helpful? Thanks for voting and helping fellow customers! 5 of 9 people found this instruction helpful Time Spent Repairing: 15-30 minutes Tools Used: Screwdriver, Pliers, TORX screwdriver, needle nose pliers, vise-grips Broken springs for the pawls 1) Remove five TORX head screws for the pull cord cover. Note: the middle screw was so tight that the head stripped out and I had to use vise-grips to get it removed. I replaced that one with a standard phillips head screw. Did you find this story helpful? Thanks for voting and helping fellow customers! 6 of 11 people found this instruction helpful Time Spent Repairing: 15-30 minutes Tools Used: Screwdriver, Pliers Recoil starter pawl broke. Replaced the old pawl with the new one. Did you find this story helpful? Thanks for voting and helping fellow customers! 5 of 9 people found this instruction helpful Time Spent Repairing: Less than 15 minutes Tools Used: Screwdriver, Pliers The Pawl had broken off and it would not recoil or turn the motor over Just removed the starter motor rope housing and it is really easy to replace Did you find this story helpful? Thanks for voting and helping fellow customers! Time Spent Repairing: 15-30 minutes Tools Used: Screwdriver, Pliers, tork bits broken pull cord (1) removed the top cover 3 bolts 1 in front and 2 in back (2) 3 bolts to remove the starter housing assembly (all bolts T25,27, or T30 (3) removed C clip on pawls on back of fly wheel with pliers, installed new pawls, springs, and C clips using needle nose pliers. (4) installed new housing assy. using new bolts and reinstalled top cover. Did you find this story helpful? Thanks for voting and helping fellow customers! Time Spent Repairing: 15-30 minutes Tools Used: Screwdriver, Pliers Paw kit broken Put in new paw kit Did you find this story helpful? Thanks for voting and helping fellow customers! 1 of 3 people found this instruction helpful Time Spent Repairing: 15-30 minutes Tools Used: Pliers, needle nose dog ears one was broke just replaced both of the dog ears Did you find this story helpful? Thanks for voting and helping fellow customers! Reviews Average Rating (out of 5): 6 Reviews Click to filter by ratings: Great part, that worked just find. The new part worked as expected, even though it looked a little different. Guest - July 18, 2020 Verified Purchase Better than OEM The parts arrived quickly and fit better than OEM parts! The fit is less sloppy and move smoothly. Great website. Delivers to Puerto Rico! Unbelievable! Most companies don't! Thanks! Guest - January 6, 2020 Verified Purchase Weed wacker Parts arrived on time, thanks Guest - October 17, 2019 Verified Purchase as described, worked good Paid extra for faster shipping and it didn't get to me when it was supposed to. Guest - October 2, 2019 Verified Purchase Very easy, saved me from buying a new trimmer Fast delivery, easy to install Guest - September 2, 2019 Verified Purchase Pawl Kit Kit arrived just days after the order. Parts were all correct and the repair was without much trouble. Will use this company again Guest - June 28, 2019 Verified Purchase Product Information Pawl Kit
Manufacturer: Craftsman Product Number: 753-08159 Classification: Part Weight: 0.01 lbs. Shipping: Ships Worldwide
< Prev Next >
< Prev Next >
Easy to install, weedwacker started 1st pull.
2) Remove one C-clip for each pawl.
3) Remove the old pawls and springs.
3) Install the new pawls and springs, making sure that the springs are engaged against the stops.
4) Install the new C-clips.
5) Replace the pull cord cover.
Manufacturer: Craftsman Product Number: 753-08159 Classification: Part Weight: 0.01 lbs. Shipping: Ships Worldwide
Source: https://www.ereplacementparts.com/pawl-kit-p-1756995.html
0 Response to "Craftsman Easy Start Weed Fan Pawl Replacement"
Post a Comment